Fuel Heaters which have been designed and defined for each FARM model. Furthermore these ducts are supplied with special metal rings for safe and easy using.

Fuel heaters BIEMMEDUE imported 100% genuine from Italia

PRODUCT SPECIFICATIONS.

• The unit can be installed horizontally or vertically.
• Burner is supplied with snorkel outlet to ensure clean combustion air through connection with external air aspiration duct.
• The new heat exchanger combined with the new high-performance fans allow for heat output of 92 / 93%.
• Before heating and after cooling of combustion chamber.
• Combustion chamber inspection glass peephole.
• Thermostat: FAN for fan control; LIMIT: for burner control; OVERHEATING: safety thermostat in case of overheating, with manual reset.
• Panels with reinforcement cross fold to ensure higher rigidity and strength.
• Bearing structure with removable panels for internal washing, even on hanging machines.
• All installation inserts and screws are exclusively metric, not self-tapping.
• Fan:
  • in compliance with directive ERP 2015.
  • extremely low-noise fan (noise level less than 69 db at 1 meter).
  • with 7 blades: high performance (air flow and static pressure) for uniform diffusion of warm air.
  • through the perforated duct.
  • insulation class IP55.
  • fan inlet to carry the air and ensure high static pressure.
• Electric switchboard:

• • can be connected to thermostat/humidistat/timer.
  • can be connected to a central control unit through wired terminal.
• Each main component (fan, burner, electrical switchboard, thermostats, etc.) is supplied with quick couplings of electrical connections IP68:
  • quick assembly and disassembly and techncial interventions.
  • elimination of installation and disassembly errors.

• Sturdy suspension hooks in stainless steel for ceiling installation and support feet in stainless steel for floor installation.

TECHNICAL SPECIFICATIONS.

APPLICATIONS INDUSTRY.

• Farming industry.
• Cattle industry.

ABOUT THE SALES AND WARRANTY SERVICE AT HEX.

• Product: Goods are imported directly 100%, carefully packed according to manufacturer’s standards.
• Delivery: Technical staff will inspect and test the machine before handing it over to the customer.
• Technical staff guides the use of the machine and guides the use of the equipment again upon request from the customer.
• Warranty & Maintenance: equipment will be warranted for 12 months according to the manufacturer’s warranty policy and regularly maintained maintenance every 4 months according to sales policy of HEX Service.